1.Connect the water pipe with Drainage of Suction.
2.Take the foot switch out from the unit, connect the handpiece.
3.Inject water into the tank. ( 3/4 of the bottle is better)
4.Connect with the electricity and turn the power switch on. (Power
switch: Green Button)
5.If you could like to use the High Speed Handpiece, please put the
Air and Water Control to High Speed handpiece side (I). If you want
to use Low Speed Handpie, please put the Air and Water Control to
Low Speed Handpiece side (II).
(Note: You should connect the high speed handpiece and the low
speed handpiece with the right hose. Please note that the two hose
can not be exchanged.)
6.Turn on the water switch and adjust the water and air for
Air pressure of High Speed Handpiece: 0.20MPa~~0.25MPa
Air pressure of Low Speed Handpiece: 0.18MPa~~0.20MPa
(Note: The air pressure has been adjusted well when it comes into
7.Please release the water of Air Filter each 3days in general use.
Push the button in the bottom of unit.
(Note: This operation depends on the times of use.)
8.Supply voltage: 110V-240V AC 60Hz/50Hz
9. SKU: YS-D-PDU A-110 B2 YS-D-PDU A-110 M4
(1) Oil-free Air compressor 1set
(2) Water tank 1piece
(3) Hose for 1 high speed handpiece and 1 low speed handpiece with
connector for (2 or 4 holes) system(not including the handpieces)
(4) 3 way syringe and pipe 1set; Low Suction and pipe 1set
(5) Electric foot pedal 1piece
(6) Spare Part 1set
(7) Water Pipe (1M) 1set
Warranty: one year